Lantronix XPort Pro XPort Pro - Command Reference - Page 108
Sets authentication to Password Authentication Protocol
View all Lantronix XPort Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
5: Commands and Levels show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. threshold Sets the threshold (byte count). If the queued data reaches this threshold then the data will be sent. = number of bytes in the threshold. timeout Sets the timeout value for packing mode in milliseconds. = timeout value, in milliseconds. trailing character Sets the trailing character for packing mode. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. write Stores the current configuration in permanent memory. password (tunnel-accept-password:1) level commands clrscrn Clears the screen. exit Exits to the next higher level. no password Removes the password so connections will be accepted unchallenged. password Sets the password required on the network side of the tunnel to begin a connection. prompt disable Inhibits any prompting for password on the network side of the tunnel. prompt enable Sets up so a user on the network side of the tunnel will be prompted for a password. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. ppp 1 (ppp:1) level commands authentication mode chap Sets authentication to Challenge-Handshake Authentication Protocol (CHAP). authentication mode ms-chap Sets authentication to MS-CHAP version 1. authentication mode ms-chapv2 Sets authentication to MS-CHAP version 2. authentication mode none Removes PPP authentication. authentication mode pap Sets authentication to Password Authentication Protocol (PAP). clrscrn Clears the screen. default authentication mode Removes PPP authentication. exit Exits to the configuration level. line Enters the line level. = number of the line (serial port) to be configured. local ip Sets the Local IP address and network mask. Formats accepted: 192.168.1.1 (default mask) 192.168.1.1/24 (CIDR) "192.168.1.1 255.255.255.0" (explicit mask) lpd Enters the configure lpd level. XPort Pro Command Reference 108