Lantronix XPort Pro XPort Pro - Command Reference - Page 66
ABC 12 3A BC 12, 3A, BC 12.3a.bc 12:3a:bc, Zeros FTP counters.
View all Lantronix XPort Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
5: Commands and Levels tftp get binary Get a binary file using TFTP tftp get binary Get a binary file using TFTP tftp put ascii Put an ascii file using TFTP tftp put ascii Put an ascii file using TFTP tftp put binary Put a binary file using TFTP tftp put binary Put a binary file using TFTP touch Create a file ftp (config-ftp) level commands admin password Sets the administrative password for the FTP server. = administrative password. admin username Sets the administrative username for the FTP server. = administrative username. It also removes the administrative password. clear counters Zeros FTP counters. clrscrn Clears the screen. default admin username Resets the FTP username to the default (admin). exit Returns to the config level. no admin password Removes the FTP administrative password. no clear counters Unzeros FTP counters. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics Displays the FTP statistics. state disable Disables the FTP server. state enable Enables the FTP server. write Stores the current configuration in permanent memory. host 1 (tunnel-connect-host:1:1) level commands address Sets the remote host to establish tunneling connections with. = IP address or host name of the remote host. aes decrypt key Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. aes decrypt key text Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by a single character. Note that quotes must enclose the value if it contains spaces. aes encrypt key Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. XPort Pro Command Reference 66