Lantronix XPort Pro XPort Pro - Command Reference - Page 51
arp config-arp level commands, client ssh-client level commands, <line> command.
View all Lantronix XPort Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
tcp keep alive write arp (config-arp) level commands add clrscrn default timeout exit remove all remove ip show show cache show history timeout write cli (config-cli) level commands clrscrn default inactivity timeout default quit connect line enable level password exit inactivity timeout login password no enable level password no inactivity timeout no login password quit connect line show show history ssh telnet write client (ssh-client) level commands clrscrn default user command XPort Pro Command Reference 5: Commands and Levels A decimal value character has the form \99. A hex value character has the form 0xFF. Enables TCP keep alive for accept mode tunneling and sets the timer. = timer value, in milliseconds. Stores the current configuration in permanent memory. Adds an entry to the ARP table, mapping an IP address to a MAC address. = IP address to be mapped. = MAC address in colon-separated form. Clears the screen. Restores the default ARP cache timeout. Exits to the configuration level. Removes all entries from the ARP cache. Removes an entry from the ARP cache. = address of the entry being removed. Displays the current configuration. Displays the ARP cache table. Displays the last 20 commands entered during the current CLI session. Sets the ARP cache timeout. = ARP cache timeout in seconds. Stores the current configuration in permanent memory. Clears the screen. The default inactivity timeout will apply to CLI sessions. Restores the default string used to quit the "connect line " command. Sets the enable-level password. Exits to the configuration level. Sets the inactivity timeout for all CLI sessions. Sets the CLI login password. Removes the enable-level password. No inactivity timeout will apply to CLI sessions. Removes the CLI login password. Sets the string used to quit the "connect line " command. The characters may be input as text or control. A control character has the form C. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Change to menu level for SSH configuration and status. Change to menu level for Telnet configuration and status. Stores the current configuration in permanent memory. Clears the screen. Restore the user command to the default login shell 51