Lantronix XPort Pro XPort Pro - Command Reference - Page 57
cpm cpm level commands, device device level commands, be specified as hex
View all Lantronix XPort Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
show history write cpm (cpm) level commands add to add to clrscrn create delete from delete disable enable exit get set as input set as input assert low set as output set as output assert low set show show cp show groups show history write device (device) level commands XPort Pro Command Reference 5: Commands and Levels Displays the last 20 commands entered during the current CLI session. Stores the current configuration in permanent memory. Adds the specified CP to the specified group. = configurable pin. = the name of the group to which you want to add the CP. Adds a specified CP to a specified group at a specified bit position. = configurable pin. = the name of the group to which you want to add the CP. = bit position. Clears the screen. Creates a configurable pin (CP) group. = the name for the new group. Removes a CP from a specified group and sets the CP to its default configuration of input. = configurable pin. = the name of the group. Removes a group and resets all CPs in that group to the default configuration of input. = the name of the group. Disables the specified group. = the name of the group. Enables a disabled group. = the name of the group. Exits to the enable level. Displays the value of the specified group. = the name of the group. Configures a CP as an asserted high input. = configurable pin. Configures a CP as an asserted low input. = configurable pin. Configures a CP as an asserted high output. = configurable pin. Configures a CP as an asserted low output. = configurable pin. Assigns a value to the specified group. = the name of the group. = numeric value to assign to the CP group. Can be specified as hex if prepended with "0x". Displays group information for specified group. = the name of the group. Displays configuration and group information for all CPs. Displays all groups defined and their state. Displays the last 20 commands entered during the current CLI session. Stores the current configuration in permanent memory. 57