Lantronix XPort Pro XPort Pro - Command Reference - Page 72
host 12 tunnel-connect-host:1:12 level commands, Stores the current configuration in permanent memory.
View all Lantronix XPort Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
5: Commands and Levels exit host name no name no remote address no ssh username protocol ssh protocol telnet remote address remote port show show history ssh username write host 12 (tunnel-connect-host:1:12) level commands address aes decrypt key aes decrypt key text aes encrypt key aes encrypt key text auto show statistics clrscrn which depends on the selected protocol. Exits to the configuration level. Change to config host level Sets the name of the host. = name of the host. Clears the name of the host. Clears the remote address of the host. Clears the SSH username associated with the host. Sets the protocol to SSH. Sets the protocol to Telnet. Sets the IP address of the remote host to connect to when this host is selected on the login connect menu. = IP address. Sets the remote port used to connect to the host. = port to be used. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Sets the username for logging into the host via SSH. = username. Stores the current configuration in permanent memory. Sets the remote host to establish tunneling connections with. = IP address or host name of the remote host. Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by a single character. Note that quotes must enclose the value if it contains spaces. Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by a single character. Note that quotes must enclose the value if it contains spaces. show connection statistics Clears the screen. XPort Pro Command Reference 72