Lantronix xDirect xDirect - User Guide - Page 34

Connect Protocol, Datagram Mode, Endpoint Configuration, UDP Connection Settings, Protocol

Get Lantronix xDirect PDF manuals and user guides View all Lantronix xDirect manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

5: Configuration Using Web Manager Figure 5-8 UDP Connection Settings Connect Protocol Protocol Select UDP from the drop-down menu. Datagram Mode Datagram Type Accept Incoming Configures the remote IP or network broadcast address and the remote port. Enter 01 for directed or broadcast UDP. The default setting is 00. Select Yes to accept incoming UDP datagrams. The default setting is Yes. Endpoint Configuration Local Port Remote Port Remote Host Use Broadcast Device Address Table Enter the local port number. Enter the port number of the remote device. Enter the IP address of the remote device. Select to broadcast the UDP datagram. Datagrams of type 01 can be sent as a broadcast by enabling this option. The default is not to broadcast. Note: Datagrams are sent as subnet-directed broadcasts. The table is enabled when Datagram Type is set to FD. Enter values between 1 and 255 to identify units on the local network of device servers. Note: Lantronix Tech Support supports Datagram type 01. Datagram Type FD is for OEM use. 3. When you are finished, click the OK button. 4. On the main menu, click Apply Settings. xDirect User Guide 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
5: Configuration Using Web Manager
xDirect User Guide
34
Figure 5-8
UDP Connection Settings
Connect Protocol
Datagram Mode
Endpoint Configuration
3.
When you are finished, click the
OK
button.
4.
On the main menu, click
Apply Settings
.
Protocol
Select
UDP
from the drop-down menu.
Datagram Type
Configures the remote IP or network broadcast address and the remote port.
Enter
01
for directed or broadcast UDP. The default setting is
00
.
Accept Incoming
Select
Yes
to accept incoming UDP datagrams. The default setting is
Yes
.
Local Port
Enter the local port number.
Remote Port
Enter the port number of the remote device.
Remote Host
Enter the IP address of the remote device.
Use Broadcast
Select to broadcast the UDP datagram. Datagrams of type 01 can be sent as
a broadcast by enabling this option. The default is not to broadcast.
Note:
Datagrams are sent as subnet-directed broadcasts.
Device Address Table
The table is enabled when
Datagram Type
is set to
FD
. Enter values
between
1
and
255
to identify units on the local network of device servers.
Note:
Lantronix Tech Support supports Datagram type 01. Datagram Type
FD is for OEM use.