Lenovo B4400 (English) User Guide - Page 43
Installed memory, during startup. The BIOS setup utility screen opens.
View all Lenovo B4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Appendix. CRU (Customer Replaceable Units) instructions Note: If only one DDR3L SDRAM is used on the computer you are servicing, the card must be installed in SLOT-0 ( : lower slot), but not in SLOT-1 ( : upper slot). b a To make sure that the DDR3L SDRAM is installed correctly, do as follows: 1 Turn the computer on. 2 Hold F1 during startup. The BIOS setup utility screen opens. The Installed memory item shows the total amount of memory installed in your computer. 39
Appendix. CRU (Customer Replaceable Units) instructions
39
To make sure that the DDR3L SDRAM is installed correctly, do as follows:
1
Turn the computer on.
2
Hold
F1
during startup. The BIOS setup utility screen opens. The
Installed memory
item shows the total amount of memory installed in
your computer.
Note:
If only one DDR3L SDRAM is used on the computer you are servicing, the card must be
installed in SLOT-0 (
: lower slot), but not in SLOT-1 (
: upper slot).
b
a