Lenovo B490 Hardware Maintenance Manual - Page 54
Removal steps of hard disk drive assembly, When installing
View all Lenovo B490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Removal steps of hard disk drive assembly Remove the screw 1 , then pull the tab in the direction shown by the arrow 2 . 2 1 Step 1 Screw (quantity) M2 × 3 mm, flat-head, nylon-coated (1) Remove the hard disk drive from the slot 3 . Color Black Torque 1.85 kgf-cm 3 When installing: Make sure that the hard disk drive connector is attached firmly. Removal steps of hard disk drive bracket Remove the screws 1 . 1 1 1 1 Step 1 Screw (quantity) M3 × 4 mm, flat-head, nylon-coated (4) Color Silver Torque 4 kgf-cm 48 Hardware Maintenance Manual
Removal steps of hard disk drive assembly
Remove the screw
1
, then pull the tab in the direction shown by the arrow
2
.
1
2
Step
Screw (quantity)
Color
Torque
1
M2 × 3 mm, flat-head, nylon-coated (1)
Black
1.85 kgf-cm
Remove the hard disk drive from the slot
3
.
3
When installing:
Make sure that the hard disk drive connector is attached firmly.
Removal steps of hard disk drive bracket
Remove the screws
1
.
1
1
1
1
Step
Screw (quantity)
Color
Torque
1
M3 × 4 mm, flat-head, nylon-coated (4)
Silver
4 kgf-cm
48
Hardware Maintenance Manual