Lenovo C50-30 Lenovo C50-30 All-In-One Computer Hardware Maintenance Manual - Page 33

Replacing the optical drive, recommends that you use a blanket, towel

Get Lenovo C50-30 PDF manuals and user guides View all Lenovo C50-30 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Step 4. Step 5. Step 6. Remove the stand base. Refer to "Removing the stand base". Remove the foot cover. Refer to "Removing the foot cover". Lift out the hard disk drive and bracket as shown. Step 7. Push the lock pins outward to release the hard disk drive from the bracket. Step 8. To install the new hard disk drive: a. Line up the new hard disk drive with the bracket and secure it with the pins. b. Connect the data and power cables to the new hard disk drive. c. Slide the hard disk drive and bracket back into position. Step 9. Reattach the foot cover and stand base. Replacing the optical drive Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches or other damage. Step 1. Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Step 2. Unplug all power cords from electrical outlets. Chapter 7. Replacing hardware 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
Step 4. Remove the stand base. Refer to “Removing the stand base”.
Step 5. Remove the foot cover. Refer to “Removing the foot cover”.
Step 6. Lift out the hard disk drive and bracket as shown.
Step 7. Push the lock pins outward to release the hard disk drive from the bracket.
Step 8. To install the new hard disk drive:
a. Line up the new hard disk drive with the bracket and secure it with the pins.
b. Connect the data and power cables to the new hard disk drive.
c. Slide the hard disk drive and bracket back into position.
Step 9. Reattach the foot cover and stand base.
Replacing the optical drive
Attention:
Turnoffthecomputerandwait3to5minutestoletitcooldownbeforeremovingthecover.
Note:
It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches
or other damage.
Step 1. Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Chapter 7
.
Replacing hardware
27