Lenovo C50-30 Lenovo C50-30 All-In-One Computer Hardware Maintenance Manual - Page 39

Removing the EMI cover

Get Lenovo C50-30 PDF manuals and user guides View all Lenovo C50-30 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Step 9. Disconnect the two cables from the converter, and then remove the screw that secures the converter board to the chassis. Step 10. Slide out the converter board to remove it. Step 11. To install the new converter board: a. Connect the two cables to the new converter board. b. Align then slide the new converter board into position. c. Secure the new converter board with the screw. Step 12. Reattach the middle cover, optical drive, stand holder, foot cover and stand base. Removing the EMI cover Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage. To replace the EMI cover Step 1. Step 2. Step 3. Step 4. Step 5. Step 6. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Unplug all power cords from electrical outlets. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Left and right view" and "Rear view" for help with locating the various connectors. Remove the stand base. Refer to "Removing the stand base". Remove the foot cover. Refer to "Removing the foot cover". Remove the optical drive. Refer to "Replacing the optical drive". Chapter 7. Replacing hardware 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
Step 9. Disconnect the two cables from the converter, and then remove the screw that secures the
converter board to the chassis.
Step 10. Slide out the converter board to remove it.
Step 11. To install the new converter board:
a. Connect the two cables to the new converter board.
b. Align then slide the new converter board into position.
c. Secure the new converter board with the screw.
Step 12. Reattach the middle cover, optical drive, stand holder, foot cover and stand base.
Removing the EMI cover
Note:
Turnoffthecomputerandwait3to5minutestoletitcooldownbeforeremovingthecover.
Note:
It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommendsthatyouuseablanket,towel,orothersoftclothtoprotectthecomputerscreenfromscratches
or other damage.
To replace the EMI cover
Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4. Remove the stand base. Refer to “Removing the stand base”.
Step 5. Remove the foot cover. Refer to “Removing the foot cover”.
Step 6. Remove the optical drive. Refer to “Replacing the optical drive”.
Chapter 7
.
Replacing hardware
33