Lenovo C50-30 Lenovo C50-30 All-In-One Computer Hardware Maintenance Manual - Page 34

Step 7. Push a small iron stick paper clip into the small hole on the optical drive cover so that the disk - drivers

Get Lenovo C50-30 PDF manuals and user guides View all Lenovo C50-30 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Step 3. Step 4. Step 5. Step 6. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Left and right views" and "Rear view" for help with locating the various connectors. Remove the stand base. Refer to "Removing the stand base". Remove the foot cover. Refer to "Removing the foot cover". Locate the optical removal notch, and then use a screw driver push the optical drive out. Step 7. Push a small iron stick (paper clip) into the small hole on the optical drive cover so that the disk springs out as shown. Step 8. Remove the 2 screws that secure the optical drive to the metal bracket. 1 Step 9. Use a small flat head screwdriver to press and push out the pins that secure the cover to the disk. 2 3 28 Lenovo C50 Series All-In-One Computer Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right views”
and “Rear view” for help with locating the various connectors.
Step 4. Remove the stand base. Refer to “Removing the stand base”.
Step 5. Remove the foot cover. Refer to “Removing the foot cover”.
Step 6. Locate the optical removal notch, and then use a screw driver push the optical drive out.
Step 7. Push a small iron stick (paper clip) into the small hole on the optical drive cover so that the disk
springs out as shown.
Step 8. Remove the 2 screws that secure the optical drive to the metal bracket.
1
Step 9. Use a small flat head screwdriver to press and push out the pins that secure the cover to the
disk.
2
3
28
Lenovo C50 Series All-In-One Computer Hardware Maintenance Manual