Lenovo PC 300PL Installing Options in your PC300PL - 6592 - Page 33

What to do next

Page 33 highlights

4 Position the module above the connector so that the two notches on the bottom edge of the module align properly with the connector. Notches 5 Firmly push the module straight down into the connector until the retaining clips pop up and snugly fit around both ends of the module. 6 To install another memory module, repeat steps 1-4. 7 Go to the device-record form in Using Your Personal Computer and record this installation. What to do next To work with another option, go to the appropriate section. To complete the installation, go to Chapter 7, "Completing the Installation" on page 66. Chapter 3. Working with Options on the System Board 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

4
Position the module above the connector so that the two notches on the
bottom edge of the module align properly with the connector.
Notches
5
Firmly push the module straight down into the connector until the retaining
clips pop up and snugly fit around both ends of the module.
6
To install another memory module, repeat steps 1–4.
7
Go to the device-record form in
Using Your Personal Computer
and record this
installation.
What to do next
±
To work with another option, go to the appropriate section.
±
To complete the installation, go to Chapter
7, “Completing the Installation”
on page
66.
Chapter
3.
Working with Options on the System Board
19