Lenovo ThinkCentre Tiny-in-One 23 User Guide (English) - Page 33

Manual image setup

Page 33 highlights

Table3-2.Troubleshooting(continued) Problem Possible cause Suggested action Reference Screen is blank The monitor is in and power Standby/Suspend indicator is mode steady amber or flashing green ● Press any key on the keyboard or move the mouse to restore operation. ● Check the Power options settings on your computer. "Understanding power management" on page 19 The power indicator is green, but there is no image. The video signal Be sure the video cable is cable is loose or connected with the system disconnected from properly. the system or monitor. "Setting up your monitor "on page 4 The power indicator is green, but there is no image. The monitor brightness and contrast are at the lowest setting. Adjust the brightness and "Adjusting your monitor contrast setting on the OSD image" on page 15 menu. One or more of the pixels appear discoloured This is a If there are more than five characteristic of the pixels missing, contact the LCD technology Customer Support Centre. and is not an LCD defect. "Service and support" on page 33 ● Fuzzy lines ● Image setup has in text or a not been blurry image. optimized ● Horizontal ● Your system or vertical Display lines through Properties setting the image. have not been optimized. Adjust the resolution settings on your system to match the native resolution for this monitor: 1920x1080 at 60 Hz. "Adjusting your monitor image" on page 15 ● Fuzzy lines ● Image setup has Perform automatic image in text or a not been setup. If automatic image blurry image. optimized setup does not help, ● Horizontal ● Your system perform manual image or vertical Display setup. lines through Properties setting the image. have not been optimized. "Selecting a supported display mode" on page 19 ● Fuzzy lines ● Image setup has When working in the native See the Advanced section in text or a not been resolution, you may find of your system's display blurry image. optimized additional improvements by properties. ● Horizontal or vertical lines through the image. ● Your system adjusting the Dots Per Inch Display (DPI) setting on your Properties setting system. have not been optimized. The image is not acceptable when switching to dual mode It has not set the optimum resolution for each mode ● Use ThinkVision® Duo software to optimize the dual screen operation ● Adjust graphic card resolution manually "Using the user controls" on page 15 Manual image setup If automatic image setup does not establish the image that you prefer, perform manual image setup. 28 ThinkCentre Tiny-in-One 23 User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45

Table3-2.Troubleshooting(continued)
Problem
Possible cause
Suggested action
Reference
Screen is blank The monitor is in
Press any key on the
“Understanding power
and power
Standby/Suspend
keyboard or move the
management” on page
19
indicator is
mode
mouse to restore
steady amber
operation.
or flashing
Check the Power options
green
settings on your
computer.
The power
The video signal
Be sure the video cable is
“Setting up your monitor
indicator is
cable is loose or
connected with the system
“on page
4
green, but
disconnected from properly.
there is no
the system or
image.
monitor.
The power
The monitor
Adjust the brightness and
“Adjusting your monitor
indicator is
green, but
brightness and
contrast are at the
contrast setting on the OSD
menu.
image” on page
15
there is no
lowest setting.
image.
One or more
This is a
If there are more than five
“Service and support” on
of the pixels
characteristic of the pixels missing, contact the
page
33
appear
LCD technology
Customer Support Centre.
discoloured
and is not an LCD
defect.
Fuzzy lines
Image setup has
Adjust the resolution
“Adjusting your monitor
in text or a
not been
settings on your system to
image” on page
15
blurry image.
optimized
match the native resolution
Horizontal
Your system
for this monitor: 1920x1080
or vertical
Display
at 60 Hz.
lines through
Properties setting
the image.
have not been
optimized.
Fuzzy lines
Image setup has
Perform automatic image
“Selecting a supported
in text or a
not been
setup. If automatic image
display mode” on page
19
blurry image.
optimized
setup does not help,
Horizontal
Your system
perform manual image
or vertical
Display
setup.
lines through
Properties setting
the image.
have not been
optimized.
Fuzzy lines
Image setup has
When working in the native See the Advanced section
in text or a
not been
resolution, you may find
of your system’s display
blurry image.
optimized
additional improvements by properties.
Horizontal
Your system
adjusting the Dots Per Inch
or vertical
Display
(DPI) setting on your
lines through
Properties setting
system.
the image.
have not been
optimized.
The image is
It has not set the
Use ThinkVision
®
Duo
“Using the user controls”
not acceptable optimum
software to optimize the
on page
15
when
resolution for each
dual screen operation
switching to
mode
Adjust graphic card
dual mode
resolution manually
Manual image setup
If automatic image setup does not establish the image that you prefer, perform
manual image setup.
28
ThinkCentre Tiny-in-One 23 User Guide