Lenovo ThinkCentre Tiny-in-One 23 User Guide (English) - Page 34
Manually installing the monitor driver
View all Lenovo ThinkCentre Tiny-in-One 23 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Note: Have your monitor powered on for about 15 minutes, until the monitor warms up. 1.Press at the bottom of the monitor to open the OSD menu. 2.Use or to select and press to access. 3.Use or to select Clock and Phase adjustment. ● Clock (pixel frequency) adjusts the number of pixels scanned by one Horizontal sweep. If the frequency is not correct, the screen shows vertical Stripes and the picture does not have the correct width. ● Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the picture has horizontal disturbances in light picture. 4.When the image no longer looks distorted, save the Clock and Phase adjustments. 5.Press to leave the OSD menu. Manually installing the monitor driver Below are steps for manually installing the monitor driver in Microsoft® Windows 8.1, Microsoft Windows 8, Microsoft Windows 7. Installing the monitor driver in Windows 8.1 To install the device driver in Microsoft Windows 8.1, do the following: Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature in Windows 8.1. 1. Turn off the computer and all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then turn on the computer. Allow your computer to boot into Windows 8.1 operating system. 4. On the Desktop, move mouse to low-right corner of screen, choose Setting, double click Control Panel, and then double click the icon of Hardware and Sound, and then clicking Display. 5. Click the Change the display settings tab. 6. Click the Advanced Settings icon. 7. Click the Monitor tab. 8. Click the Properties button. 9. Click the Driver tab. 10. Click Update Driver, then click Browse the computer to find the driver program. 11. Select Pick from the list of device driver program on the computer. 12. Click the Have Disk button. Click the Browse button and navigate to the following directory: X:\Monitor Drivers (where X is the drive letter designator for the CD-ROM drive). 13. Select the "TinyinOne23.inf" file and click the Open button. Click the OK button. 14. Select ThinkCentre Tiny-in-One 23 and click Next. The files will be copied from the CD to your hard disk drive. 15. Close all open windows and remove the CD. 16. Restart the system. The system will automatically select the maximum refresh rate and Chapter 3 Reference information 29
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45