Lenovo ThinkPad 570E ThinkPad 570 User's Reference - Page 202

Problem, Cause and action, RPL Token Ring, Modem card, SCSI card, Network card, Combo card

Page 202 highlights

Troubleshooting charts Problem PC Card support software does not recognize your PC Card. The PC Card is recognized by PC Card support software, but the "Not Ready" or "Not Configured" message is shown. The system cannot start from the PC Card. The PC Card is installed and configured, but it does not work. Cause and action Make sure that: If the PC Card is not a modem, an ATA, a Flash, or an SRAM card, you have the proper client device driver for the card. In Windows 95, the PC Card must have an INF file associated with it. Your PC Card supports PCMCIA Release 2.0, 2.01, or 2.10. Refer to the manual that came with your PC Card. If your PC Card does not support PCMCIA Release 2.0, 2.01, or 2.10, you cannot use PC Card Director. Contact your PC Card supplier. Your PC Card is working by following the diagnostic instructions for your PC Card, if any. Make sure that: The PC Card enabler is installed. Refer to the manuals supplied with your PC Card. If the PC Card is not a modem, an ATA, a Flash, or an SRAM card, you have the proper client device driver for the card. In Windows 95, the PC Card must have an INF file associated with it. The resources for the PC Card are correctly reserved. Refer to "Resolving System Resource Conflicts" in the Online User's Guide. Make sure that the correct system resources are being used for the PC Card. RPL (Token Ring): IRQ 9 Memory: X'D0000'-X'D3FFF' I/O: X'A20'-X'A23' Modem card: Make sure all settings in the "Modem Control" panel and in your communication application correspond and are correct. SCSI card: Make sure the correct driver for the SCSI card is installed. Note: SCSI cards can be inserted while you are operating your computer; however, it is recommended that you insert them at boot time. Network card: Make sure all network components are correctly installed. Combo card: Make sure the correct driver for the Combo card is installed. Restart the system, and then insert the Combo card. 186 IBM ThinkPad 570 User's Reference

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233

Troubleshooting charts
Problem
Cause and action
PC Card support software
does not recognize your
PC Card.
Make sure that:
If the PC Card is not a modem, an ATA, a Flash, or an SRAM card, you
have the proper client device driver for the card.
In Windows 95, the PC
Card must have an INF file associated with it.
Your PC Card supports PCMCIA Release 2.0, 2.01, or 2.10.
Refer to the
manual that came with your PC Card.
If your PC Card does not support
PCMCIA Release 2.0, 2.01, or 2.10, you cannot use PC Card Director.
Contact your PC Card supplier.
Your PC Card is working by following the diagnostic instructions for your PC
Card, if any.
The PC Card is
recognized by PC Card
support software, but the
“Not Ready” or “Not
Configured” message is
shown.
Make sure that:
The PC Card enabler is installed.
Refer to the manuals supplied with your
PC Card.
If the PC Card is not a modem, an ATA, a Flash, or an SRAM card, you
have the proper client device driver for the card.
In Windows 95, the PC
Card must have an INF file associated with it.
The resources for the PC Card are correctly reserved.
Refer to “Resolving
System Resource Conflicts” in the
Online User's Guide
.
The system cannot start
from the PC Card.
Make sure that the correct system resources are being used for the PC Card.
RPL (Token Ring):
IRQ 9
Memory: X
'
D0000
'
–X
'
D3FFF
'
I/O: X
'
A20
'
–X
'
A23
'
The PC Card is installed
and configured, but it
does not work.
Modem card
:
Make sure all settings in the “Modem Control” panel and in
your communication application correspond and are correct.
SCSI card
:
Make sure the correct driver for the SCSI card is installed.
Note:
SCSI cards can be inserted while you are operating your computer;
however, it is recommended that you insert them at boot time.
Network card
:
Make sure all network components are correctly installed.
Combo card
:
Make sure the correct driver for the Combo card is installed.
Restart the system, and then insert the Combo card.
186
IBM ThinkPad 570 User's Reference