Lenovo ThinkServer RD330 MegaRAID SAS Software User Guide - Page 189

MegaRAID SAS Software User Guide Chapter 5: MegaRAID Command Tool | Battery Backup Unit-Related Properties 5.11.2 Display BBU Status Information Use the command in the following table to display complete information about the status of the BBU, such as temperature and voltage, for the selected controller(s). Table 54: Display BBU Status Information Convention Description MegaCli -AdpBbuCmd -GetBbuStatus -aN|-a0,1,2|-aALL Displays complete information about the BBU status, such as the temperature and voltage. The information displays in the following formats: BBU Status for Adapter: xx Battery Type: XXXXXX(string) Voltage: xx mV Current: xx mA Temperature: xx C° Firmware Status: xx Battery state: xx Gas Gauge Status: Fully Discharged: Yes/No Fully Charged: Yes/No Discharging: Yes/No Initialized: Yes/No Remaining Time Alarm: Yes/No Remaining Capacity Alarm: Yes/No Discharge Terminated: Yes/No Over Temperature: Yes/No Charging Terminated: Yes/No Over Charged: Yes/No Additional status information displays differently for iBBU™ and BBU. For iBBU: Relative State of Charge: xx Charger System State: xx Charger System Ctrl: xx Charging Current: xx mA Absolute State of Charge: xx% Max Error: xx% For BBU: Relative State of Charge: xx Charger Status: xx Remaining Capacity: xx mAh Full Charge Capacity: mAh isSOHGood: Yes/No Page 189