LevelOne FCS-4041 User Manual - Page 35

LevelOne FCS-4041 Manual

Get LevelOne FCS-4041 PDF manuals and user guides View all LevelOne FCS-4041 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

7.2.3.3 SNMP The SNMP (Simple Network Management Protocol) setting can be found under this path: System> Network> SNMP. With Simple Network Management Protocol (SNMP) support, the IP Camera can be monitored and managed remotely by the network management system. SNMP v1/ v2  Enable SNMP v1/ v2 Select the version of SNMP to use by checking the box.  Read Community Specify the community name that has read-only access to all supported SNMP objects. The default value is "public".  Write Community Specify the community name that has read/write access to all supported SNMP objects (except read-only objects). The default value is "write". Traps for SNMP v1/ v2 Traps are used by the IP Camera to send massages to a management system for important events or status changes.  Enable Traps Check the box to activate trap reporting.  Trap address Enter the IP address of the management server.  Trap community Enter the community to use when sending a trap message to the management system. 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
35
7.2.3.3
SNMP
The SNMP (Simple Network Management Protocol) setting can be found under
this path:
System> Network> SNMP
.
With Simple Network Management Protocol (SNMP) support, the IP Camera
can be monitored and managed remotely by the network management system.
SNMP v1/ v2
Enable SNMP v1/ v2
Select the version of SNMP to use by checking the box.
Read Community
Specify the community name that has read-only access to all supported
SNMP objects. The default value is
“public”.
Write Community
Specify the community name that has read/write access to all supported
SNMP objects (except read-only objects).
The default value is “write”.
Traps for SNMP v1/ v2
Traps are used by the IP Camera to send massages to a management system
for important events or status changes.
Enable Traps
Check the box to activate trap reporting.
Trap address
Enter the IP address of the management server.
Trap community
Enter the community to use when sending a trap message to the
management system.