LevelOne WAC-1000 User Manual - Page 53

Clock

Get LevelOne WAC-1000 PDF manuals and user guides View all LevelOne WAC-1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Manage VLAN: Sets the needed VLAN ID, in the range of 0-4094. Manage IP address: Sets the AC's management IP address. Subnet mask: Sets the subnet mask. Gateway address: Sets the gateway address. Primary DNS server: Sets the IP address of the primary DNS server. Secondary DNS server: Sets the IP address of the secondary DNS server. Wireless controller address: Sets the IP address of wireless controllers. Password: Administrator password. Confirm password: The password for administrators to confirm. MAC address: The device MAC address. It is suggested not to modify the MAC address of the LAN port freely. Interface mode: Sets the duplex mode and rate for interfaces. Options are: Auto (adaptive), 10M-FD (10M full duplex), 10M-HD (10M half duplex), 100M-FD (100M full duplex), 100M-HD (100M half duplex). The default is Auto, which is usually not required to be modified, and if there are any compatibility issues, or the device used does not support automatic consultation function, then Ethernet consultation type can be set here. Enable port mirror: Checking it to enable this feature. Monitoring port: Any one of ports 1 ~ 5 can be selected, and the monitoring port is LAN1 by default. Tip: After modifying the IP address of LAN port, you must use a new IP address to log into the device, and the IP for logging in to the host is on the same network segment. 10.3 Clock In order to guarantee that the functions of the device relating to time work normally, the clock of the device needs to be accurately set, to make it synchronize with the local standard time. The device provides two ways of system time setting, "Manual setup time" and "Network time synchronization". It is recommended to use "Network time synchronization", and the device will automatically get the standard time from the Internet. Figure 10- 3 Clock management Current system time: Displays the current date and time information of the device (unit: Y-M-D, H:M:S). 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
49
Manage VLAN: Sets the needed VLAN ID, in the range of 0-4094.
Manage IP address: Sets the AC's management IP address.
Subnet mask: Sets the subnet mask.
Gateway address: Sets the gateway address.
Primary DNS server: Sets the IP address of the primary DNS server.
Secondary DNS server: Sets the IP address of the secondary DNS server.
Wireless controller address: Sets the IP address of wireless controllers.
Password: Administrator password.
Confirm password: The password for administrators to confirm.
MAC address: The device MAC address. It is suggested not to modify the MAC address of the LAN port
freely.
Interface mode: Sets the duplex mode and rate for interfaces. Options are: Auto (adaptive), 10M-FD (10M full
duplex), 10M-HD (10M half duplex), 100M-FD (100M full duplex), 100M-HD (100M half duplex). The
default is Auto, which is usually not required to be modified, and if there are any compatibility issues, or the
device used does not support automatic consultation function, then Ethernet consultation type can be set here.
Enable port mirror: Checking it to enable this feature.
Monitoring port: Any one of ports 1 ~ 5 can be selected, and the monitoring port is LAN1 by default.
Tip
: After modifying the IP address of LAN port, you must use a new IP address to log into the device, and
the IP for logging in to the host is on the same network segment.
10.3 Clock
In order to guarantee that the functions of the device relating to time work normally, the clock of the device needs
to be accurately set, to make it synchronize with the local standard time. The device provides two ways of system
time setting, "Manual setup time" and "Network time synchronization". It is recommended to use "Network time
synchronization", and the device will automatically get the standard time from the Internet.
Figure 10- 3 Clock management
Current system time: Displays the current date and time information of the device (unit: Y-M-D, H:M:S).