Lexmark E350d Service Manual - Page 25
Buttons, Not Ready, Paper Menu, Paper Source, Manual Feeder
View all Lexmark E350d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
4512-420, -430 Buttons Use the six operator panel buttons to open a menu, scroll through a list of values, change printer settings, and respond to printer messages. Note: Buttons act on the information displayed on the second line of the operator panel. The use of the buttons and the layout of the display are described in the following table: Button or control panel item Function Display The display shows messages describing the current state of the printer and indicating possible printer problems that must be resolved. The top line of the display is the header line. It will display the current status and the Supplies (Warnings) status. This is where printer status, supplies messages, and show-me screens are viewed. Indicator light A green LED is used on the display, including the printer status. If the light is Off On Flashing The printer is Off On, but idle On and busy Stop Menu buttons Back Go Press and release to stop the mechanical operation of the printer. The Not Ready message will appear. Operation will resume when is pressed. The and buttons are used to enter a menu group. Once a menu group is active, press and release to step to the next selection, or press and release to step to the previous selection. These buttons can also be used to automatically increase or decrease the desired number of copies. Press and release to initiate action on a selection. Selects the menu selection displayed on the second line of the display. If a menu is displayed such as Paper Menu, then opens the menu and displays the first printer setting contained in the menu. If a menu item such as Paper Source is displayed, then opens the item and displays the default setting. If a menu item such as Manual Feeder is displayed, then saves the selection as the new default setting for Paper Source. The printer will display the Saved message momentarily and then return to the menu item level. Press and release to return to the previous menu group. If at the top of the menu group, the button functions as a Go button. Press and release to place the printer in the Ready state after an off line situation (to exit menus, to clear most messages). Diagnostics information 2-3