Lexmark E350d Service Manual - Page 66
Printhead assembly mechanical adjustment - photo com
View all Lexmark E350d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
4512-420, -430 Printhead assembly mechanical adjustment A printhead needs to be correctly positioned after it has been removed. Align it to the frame or use the same position as the removed printhead. An indicator is located at the front right-hand screw for reference. Note: Skew is caused by a sheet being fed through the printer while misaligned. The entire image is rotated relative to the sheet edges. However, a mechanically misaligned printhead causes the horizontal lines to appear skewed while the vertical lines remain parallel to the vertical edges. Paper feed skew Printhead misalignment There are no adjustments for skew. Check the pick roll (paper pick assembly) for wear, the paper path for obstructions, the fuser for proper setting, and the tray paper guides for fit to the media. To adjust the printhead: 1. Enter the Diagnostics Menu. See "Entering Diagnostics Mode" on page 3-5. 2. Select PRINT TESTS. 3. Select Tray 1. 4. Select Single. 5. Fold the printed test page on the left side so that a few millimeters of grid lines wrap around the outside of the fold. See photo below. 6. Fold a second vertical fold near the center so that the left side top edge aligns with the right side top edge. 3-12 Lexmark™ E350d, E352dn