Lexmark E350d Service Manual - Page 82
Rear cover removal, Right side cover removal
View all Lexmark E350d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
4512-420, -430 Rear cover removal 1. Remove the right side cover. See "Right side cover removal" on page 4-5. 2. Remove the left side cover. See "Left side cover removal" on page 4-4. 3. Remove the two screws (A). 4. Open the rear cover. 5. Lift the rear cover, unhooking it from the frame at the bottom, and remove. Note: In re-installation, check to make sure that the fuser ground cable is routed out of the way and is not pinched or damaged. 4-6 Lexmark™ E350d, E352dn
4-6
Lexmark™ E350d, E352dn
4512-420, -430
Rear cover removal
1.
Remove the right side cover. See
“Right side cover removal” on page 4-5
.
2.
Remove the left side cover. See
“Left side cover removal” on page 4-4
.
3.
Remove the two screws (A).
4.
Open the rear cover.
5.
Lift the rear cover, unhooking it from the frame at the bottom, and remove.
Note:
In re-installation, check to make sure that the fuser ground cable is routed out of the way and is not
pinched or damaged.