Lexmark E350d Service Manual - Page 62
Step 1 printout, Printhead assembly electronic adjustment
View all Lexmark E350d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
4512-420, -430 Printhead assembly electronic adjustment A step-by-step process to align a new printhead. Note: Before aligning the printhead electronically, first align the printhead mechanically, if needed. See "Printhead assembly mechanical adjustment" on page 3-12. 1. Press Go to print Step 1 test page. Step 1 printout (sample only; use actual sheet) 2. In column of Step 1 test page, look for the position where the vertical lines are the closest to each other. Press to select the corresponding number (new setting). 3. Press and release to move to the pattern on the right side of Step 1 test page. 4. Press to select the setting. 3-8 Lexmark™ E350d, E352dn
3-8
Lexmark™ E350d, E352dn
4512-420, -430
Printhead assembly electronic adjustment
A step-by-step process to align a new printhead.
Note:
Before aligning the printhead electronically, first align the printhead mechanically, if needed. See
“Printhead assembly mechanical adjustment” on page 3-12
.
1.
Press
Go
to print Step 1 test page.
2.
In column <BA> of Step 1 test page, look for the position where the vertical lines are the closest to each
other. Press
to select the corresponding number (new setting).
3.
Press and release
to move to the <CA> pattern on the right side of Step 1 test page.
4.
Press
to select the <CA> setting.
Step 1 printout
(sample only; use actual sheet)