Lexmark E350d Service Manual - Page 71
Input tray tests, Duplex Feed 1, Feed Tests input tray
View all Lexmark E350d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
4512-420, -430 Duplex Feed 1 1. Select Duplex Feed 1 from the DUPLEX TESTS menu. The following will appear on the display: Duplex Feed 1 Feeding... 2. A blank page will feed through the printer. The following will appear on the display: Duplex Feed 1 Clear Paper... 3. Remove the blank page from the printer, and press Back to return to the DUPLEX TESTS menu. Input tray tests Feed Tests (input tray) These tests are used to determine if the input tray sensors are working correctly. Observe the paper path as blank media is being fed through the printer. The front access door cannot be opened during the feed test. To observe the paper path, open the door cover to access the manual feeder. Any media that meets the specifications for the printer can be used for this test. To run the Input Tray Feed Test: 1. Open the manual feeder door. Note: Do not open the front cover. 2. Select the Feed Test from the INPUT TRAY TESTS menu. 3. Select the input source. Only installed sources display, but may include Tray 1, Tray 2, and Manual Feeder. 4. Select Single to feed a single blank sheet or Continuous to feed blank sheets until you press Return or Stop. The selected input source appears on the display: Feeding... Diagnostic aids 3-17