Lexmark MS621 Users Guide PDF - Page 66
Cleaning the printer, Ordering parts and supplies, Checking the status of parts and supplies
View all Lexmark MS621 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Maintaining the printer 66 Cleaning the printer CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before proceeding. Notes: • Perform this task after every few months. • Damage to the printer caused by improper handling is not covered by the printer warranty. 1 Turn off the printer, and then unplug the power cord from the electrical outlet. 2 Remove paper from the standard bin and multipurpose feeder. 3 Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum. 4 Wipe the outside of the printer with a damp, soft, lint‑free cloth. Notes: • Do not use household cleaners or detergents, as they may damage the finish of the printer. • Make sure that all areas of the printer are dry after cleaning. 5 Connect the power cord to the electrical outlet, and then turn on the printer. CAUTION-POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible. Ordering parts and supplies To order parts and supplies in the U.S., contact 1-800-539-6275 for information about Lexmark authorized dealers in your area. In other countries or regions, go to www.lexmark.com or contact the place where you purchased the printer. Note: All life estimates for printer supplies assume printing on letter‑ or A4‑size plain paper. Checking the status of parts and supplies From the control panel, navigate to: > Status/Supplies > > Supplies > Using genuine Lexmark parts and supplies Your Lexmark printer is designed to function best with genuine Lexmark parts and supplies. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. It can also affect warranty coverage. Damage caused by the use of third-party parts and supplies is not covered by the warranty. All life indicators are designed to function with Lexmark parts and supplies, and may deliver unpredictable results if third-party parts and supplies are used. Imaging component usage beyond the intended life may damage your Lexmark printer or its associated components.