Lexmark Network Printer Device User's Guide for Windows - Page 20

4 Troubleshooting Use this section to solve problems you may have while setting up your print server. Indicator light status Indicator light pattern State Result Power indicator Off The Print Server does not have power. Make sure that the power cord is attached correctly and is plugged into an outlet with power. USB status Off The USB cable connecting the print server to either the printer or the computer is not secure. Make sure that the USB cable is connected correctly on both ends. On The USB cable connecting the print server to the printer or computer is secure and recognized by the USB port. Blinking A print job is active. Wireless status Off The print server is searching for a network connection, or no network connection is available. On The print server is connected to the network. USB status and Wireless Blinking The print server has experienced an error. Power the print server off status alternately and back on again. If the problem continues, contact the Customer Support Center. Note: To locate the Power and USB indicator lights, see Understanding the print server indicator lights. The Setup Utility CD does not auto launch 1 Close all open software programs. 2 Reinsert the Setup Utility CD. If the setup utility screen appears, continue your setup instructions. Troubleshooting 14