Lexmark Network Printer Device User's Guide for Windows - Page 22

The print server was configured correctly, but cannot be found on the network • Verify that the print server has power and that the power indicator light is on. • Verify that the print server is within range of the wireless network. • Verify that the print server is located away from other electronic devices that may interfere with the wireless signal. • Verify that your wireless network is using a unique network name (SSID). If not, it is possible that the print server is communicating over a different, nearby network that uses the same network name. • Verify that the print server has a valid IP address on the network. No printer was found attached to the print server • Verify that the USB cable is properly connected to both the printer and the print server. • Verify that the printer has power. • Verify that the printer was set up correctly. • Verify that the print server has power and is available on your network. My network printer does not print • Make sure all cables to the printer, print server, electrical outlet, and network connection are secure. • Make sure the Power, USB, and Wireless status indicator lights are on. • Check the printer status. • Make sure the network is operating properly. Refer to your network documentation, or contact the person who set up your network if you are not sure that your network is operating correctly. • Make sure the printer driver is installed on the computer from which you are sending the print job. Note: You must install the printer driver on each computer that uses the network printer. • Make sure the correct printer port is selected. • Restart the computer. • Uninstall and then reinstall the printer software. If the printer still does not print, refer to your printer documentation for help. The print server was configured correctly, but cannot be found on the network 16