Lexmark Optra C710 Setup Guide - Page 28
cover covering the opening for the option slot you, Before installing an adapter, remove the adapter
![]() |
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Warning! Adapters are easily damaged by static electricity. Touch something metal before you touch an adapter. Screws Adapter cover You need a number 2 Phillips screwdriver to install the adapter. If you need to remove an adapter first, see "Removing an adapter" on page 26. 1 Follow the steps for "Removing the rear cover and EMI shield" on page 7 if the rear cover is still installed. 2 Before installing an adapter, remove the adapter cover covering the opening for the option slot you are going to use. a Remove the screw on each end of the adapter cover. Save the screws. You will need them to secure the adapter to the connector bracket. b Remove the plate. Save the adapter cover so you can reinstall it if you remove the adapter. 3 Unpack the adapter. Save the packing materials. 24 Installing adapters
![](/manual_guide/products/lexmark-c710-setup-guide-223e056/28.png)