Lexmark Optra C710 Setup Guide - Page 59
Remove the orange tape and packing material, from the coating roll.
![]() |
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
5 Remove the orange tabs and any packing material from the fuser compartment. a Rotate the tabs toward each other as shown. b Pull the tabs up to remove them from the fuser. Coating roll 6 Remove the coating roll from its package. 7 Remove the orange tape and packing material from the coating roll. Make sure all of the plastic wrapping is removed from the coating roll. Install the coating roll 55
![](/manual_guide/products/lexmark-c710-setup-guide-223e056/59.png)
55
Install the coating roll
5
Remove the orange tabs and any packing material
from the fuser compartment.
a
Rotate the tabs toward each other as shown.
b
Pull the tabs up to remove them from the fuser.
6
Remove the coating roll from its package.
7
Remove the orange tape and packing material
from the coating roll.
Make sure all of the plastic wrapping is removed
from the coating roll.
Coating roll