Lexmark Optra E plus User's Guide - Page 70
Engine clean cycle, top cover is open, do a double button press.
View all Lexmark Optra E plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Engine clean cycle For print quality problems, such as stray toner marks appearing on the paper, select the Engine Clean Cycle setting to remove any toner that may have accumulated. 1 Turn off the printer. 2 Open the top cover. 3 Turn the printer back on. 4 Load paper into the paper feeder. 5 When the Error light comes on, indicating the top cover is open, do a double button press. 6 When the Error light and Press Button light blink, close the cover. The Special Function Menu is activated. Engine Clean Cycle is the first menu selection in the Special Function Menu. The operator panel Ready light is on solid, the Error light is blinking and the Press Button light is blinking. 7 Do a long button press to start Engine Clean Cycle. a The printer feeds one sheet of plain paper through the paper path to remove any accumulated toner. b Once the paper exits into the output bin, the printer returns to the Ready state. 8 If necessary, repeat this process two or three times until all of the excess toner is removed. Indicator lights 57