Lexmark Optra E plus User's Guide - Page 82
Appendix B, Advanced troubleshooting, If your printer lights look like, this in configuration mode
View all Lexmark Optra E plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
If your printer lights look like this in configuration mode: Then your printer: Factory Default Parallel Port Enabled setting is set to Auto, the factory default. If your printer encounters a memory shortage when trying to print a job and you are not using the parallel port, turn off Parallel Port Enabled to free up a little more memory. There are three settings for Parallel Port Enabled: Off, On and Auto. • Do a brief button press to scroll through the settings (Off, On, Auto) for this menu item. • Do a double button press to scroll to the next menu item, NPA Mode (Parallel). • Do a long button press to select and save a setting for this menu. As the setting is saved, all operator panel indicator lights remain on for approximately 2 seconds. Turn off the printer to exit configuration mode. Auto If your printer lights look like this in configuration mode: Then your printer: Factory Default Parallel NPA Mode setting is set to Auto, the factory default. Auto When NPA Mode is enabled, your computer can send print jobs to the printer and query printer status information simultaneously. There are three settings for NPA Mode (Parallel): Off, On and Auto. • Do a brief button press to scroll through the settings (Off, On, Auto) for this menu item. • Do a double button press to scroll to the next menu item, Parallel Protocol. • Do a long button press to select and save a setting for this menu. As the setting is saved, all operator panel indicator lights remain on for approximately 2 seconds. Turn off the printer to exit configuration mode. Appendix B: Advanced troubleshooting 69