Lexmark Optra E plus User's Guide - Page 86
This illustration represents the operator panel, settings
View all Lexmark Optra E plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
This illustration represents the operator panel settings in configuration mode when an indicator light is blinking. The following tables describe the function of each setting. If your printer lights look like this in configuration mode: Then your printer: Factory Default Parallel Mode 1 setting is on, the factory default. On This setting enables or disables the pull up resistors on the parallel port signals. It is useful for personal computers that have open collector outputs on the parallel port signals. Set Parallel Mode 1 On to disable the resistors or Off to enable the resistors. • Do a brief button press to scroll through the settings (On, Off) for this menu item. • Do a double button press to scroll to the next menu item, Parallel Mode 2. • Do a long button press to select and save a setting for this menu. As the setting is saved, all operator panel indicator lights remain on for approximately 2 seconds. Turn off the printer to exit configuration mode. Appendix B: Advanced troubleshooting 73