Lexmark Optra E plus User's Guide - Page 83
If your printer lights look like, this in configuration mode, Then your printer, Factory, Default
View all Lexmark Optra E plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
If your printer lights look like this in configuration mode: Then your printer: Factory Default Parallel Protocol setting is set to Fastbytes, the factory default. Fastbytes When the protocol is set to Fastbytes, the printer receives information at a much faster transmission rate, provided the host computer supports Fastbytes. When the protocol is set to Standard, the printer receives information at a normal transmission rate. The Press Button light is off when Parallel Protocol is set to Standard. • Do a brief button press to change the setting (Fastbytes, Standard). • Do a double button press to scroll to the next menu item, PPDS Activated. • Do a long button press to select and save a setting for this menu. As the setting is saved, all operator panel indicator lights remain on for approximately 2 seconds. Turn off the printer to exit configuration mode. 70 Appendix B: Advanced troubleshooting