Lexmark T620 Setup Guide - Page 21

Installing printer memory or flash memory Memory connector 1 Memory connector 2 Memory connector 3 Note: Some memory and firmware options offered for other Lexmark printers cannot be used with your printer. Refer to the Lexmark T620/T622 Publications CD for specifications. 1 Follow the steps in "Accessing the printer system board" beginning on page 17. Warning! Electronic components can be damaged by static electricity. Touch something metal on the printer before you touch the memory option. Latch Connection points Latch Notch 2 Unpack the memory option. Avoid touching the connection points along its edge. Save the packaging materials. 3 Open both latches on the connector completely. Insert the memory option straight into the connector with the connection points pointing toward the system board. 4 Push the memory card firmly into the connector until it snaps into place. Make sure each latch fits over the notch located on either side of the option card. 5 Follow the steps in "Reattaching the shield and closing the doors" beginning on page 22. 19