Lexmark T620 Setup Guide - Page 3

Getting started 137.16 cm (4.5 ft) 1 Select a well-ventilated place to set up your printer. Allow at least as much space as shown in the illustration. Make sure you have a sturdy, low table or the optional printer stand on which to set the printer. 304.8 mm (12 in.) 508 mm (20 in.) Printer Handhold Power switch cover Power cord 304.8 mm (12 in.) 304.8 mm (12 in.) CDs Paper bail and bracket Operator panel overlay (non-English only) 2 Remove all items from the box except the printer. If any items are missing, contact the place where you bought the printer. Save the carton and packing material in case you need to repack the printer for service or storage. Note: Leave the printer in the box until you are ready to install it. Then ask someone to help you lift the printer using the handholds. Tray number decals - Lexmark T Family T622 model only 500 sheet drawer - Lexmark T Family T622 model only Turn off the printer If your printer is already set up, make sure the printer power is off and the power cord and any cables are unplugged before installing any options. Options compatibility Options compatible with Lexmark T Family printers are labeled with a colored triangle. Label locations are indicated in the illustrations in this book. Troubleshooting If you encounter a problem while setting up the printer, refer to the Lexmark T620/T622 Publications CD. 1