Lexmark XM7270 User Guide - Page 196

Understanding the printer menus 196 Use Scan edge to edge Off On Sharpness 1-5 Sample Copy Off On Fax Settings menu To Allow edge‑to‑edge scanning of the original document. Note: Off is the factory default setting. Adjust the amount of sharpness of a copy. Note: 3 is the factory default setting. Create a sample copy of the original document. Notes: • Off is the factory default setting. • This menu item appears only when a formatted, working printer hard disk is installed. Fax Mode (Analog Fax Setup) menu Analog Fax Setup mode sends the fax job through a telephone line. General Fax Settings Use Restore Factory Defaults Optimize Fax Compatibility Fax Name Fax Number Fax ID Fax Name Fax Number Enable Manual Fax On Off Memory Use All receive Mostly receive Equal Mostly send All send To Restore the factory defaults of all fax settings. Optimize fax compatibility with other fax machines. Specify the name of the fax in the printer. Specify the number assigned to the fax. Specify how the fax is identified. Note: Fax Number is the factory default setting. Set the printer to fax manually, which requires a line splitter and a telephone handset. Notes: • Off is the factory default setting. • Use a regular telephone to answer an incoming fax job and to dial a fax number. • Press # 0 on the numeric keypad to go directly to this setting. Define the allocation of non-volatile memory between sending and receiving fax jobs. Note: Equal is the factory default setting.