Lexmark lexmark J110 Service Manual - Page 118

4085-001 The power indicator blinks indicating the memory test is in process. The printer continually runs the same test until canceled from the operator panel (by pressing Return or Stop). Each time the test finishes, the screen is updated with the result. If the test passes, the Pass Count is incremented by 1. However, if the test fails, a failure message is displayed for approximately 3 seconds and the Fail Count is incremented by 1. • DRAM Error Once the maximum pass count or fail count is reached, the test is stopped and the final test results are displayed. Press Return or Stop to exit the test. ROM Memory Test The ROM Memory Test checks the validity of the RIP code and fonts. When this test is selected from the operator panel, the following screen is displayed and the printer begins testing ROM memory for the first time. ROM Memory Test P:###### F:##### Terminology: • P:###### represents the number of times the memory test has passed (finished successfully). Initially 000000 is displayed for ######. The maximum pass count is 999,999. • F:##### represents the number of times the memory test has failed (finished with errors). Initially 00000 is displayed for #####. The maximum fail count is 99,999. The power indicator blinks indicating the memory test is in process. The printer continually runs the same test until canceled from the operator panel (by pressing Return or Stop). 3-24 Service Manual