Lexmark lexmark J110 Service Manual - Page 193
PerfectFinish Motor Removal, Index Motor Assembly Removal, Rear Cover Removal on,
![]() |
View all Lexmark lexmark J110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
4085-001 PerfectFinish Motor Removal 1. Remove the rear cover. Refer to "Rear Cover Removal" on page 4-3. 2. Disconnect the PerfectFinish motor and encoder connector (J5) from the engine board. 3. Remove the two screws {A} from the motor. 4. Remove the motor. Note routing of wiring. Index Motor Assembly Removal 1. Remove rear cover. Refer to "Rear Cover Removal" on page 4-3. 2. Remove engine board cover. Refer to "Tray 2 Covers Removal" on page 4-49. 3. Disconnect (J16) from the engine board. 4. Remove the encoder disk feed roller assembly. Refer to "Encoder Disk Feed Roller Assembly Removal" on page 4-34. 5. Remove the two screws from the index motor. 6. Remove the motor. Note the routing of the wiring. Repair Information 4-33
![](/manual_guide/products/lexmark-j110-service-manual-1c3d013/193.png)
Repair Information
4-33
4085-001
PerfectFinish Motor Removal
1.
Remove the rear cover. Refer to
“Rear Cover Removal” on
page 4-3
.
2.
Disconnect the PerfectFinish motor and encoder connector (J5)
from the engine board.
3.
Remove the two screws {A} from the motor.
4.
Remove the motor. Note routing of wiring.
Index Motor Assembly Removal
1.
Remove rear cover. Refer to
“Rear Cover Removal” on
page 4-3
.
2.
Remove engine board cover. Refer to
“Tray 2 Covers Removal”
on page 4-49
.
3.
Disconnect (J16) from the engine board.
4.
Remove the encoder disk feed roller assembly. Refer to
“Encoder Disk Feed Roller Assembly Removal” on page 4-34
.
5.
Remove the two screws from the index motor.
6.
Remove the motor. Note the routing of the wiring.