Lexmark lexmark J110 Service Manual - Page 129
Diagnostics (Mode 2) - Printer Setup, K&C TSR Test, Return, Setting the Count
View all Lexmark lexmark J110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
4085-001 K&C TSR Test This test determines the status of the printhead TSR (thermal sense resistor). The resistance is displayed real time. The following screen is displayed: K & C TSR Test K=104B3 C=104A1 To exit the test, select Return or Stop. Note: If zero is displayed on "K"= or "C"=, replace the printhead. M&Y TSR Test This to determines the status of the printhead TSR (thermal sense resistor). The resistance is displayed real time. The following screen is displayed: M & Y TSR Test K=104B3 C=104A1 To exit the test, select Return or Stop. Note: If zero is displayed on "K"= or "C"=, replace the printhead. Diagnostics (Mode 2) - Printer Setup Setting the Page Count The printer's page count can be changed using the Diagnostics menus. This menu is used by the CE to reset the Page Count setting whenever the engine card is replaced. The engine card contains the printer's NVRAM memory. When Page Count is selected from the PRINTER SETUP menu, the current page count is displayed as follows: Page Count =1234567* Diagnostic Aids 3-35