Lexmark lexmark J110 Service Manual - Page 57

4085-001 Attendance Message Description Action Load Load A representation of the operator panel when the indicated source is out of media. The input source is displayed on line 1 and could be one of the following: Tray 1, Tray 2, MP Feeder. One of the following items is shown on line 2: In all cases, both the type and size are displayed on line 2. The requested type could be one of the following: Bond, Card Stock, Coated, Colored, Envelope, Glossy, IronOn, Labels, Letterhead, Photo, Plain Preprint, Transparency The requested size could be one of the following: Letter, Legal, B5, A4, Executive, Universal, A5, 7 3/4, 9, 10, DL, C5, B5, Other Sources equipped with both size-sensing and media-present hardware: Load the requested size and/or paper type in the source indicated in the message. If media is present in the source and the sensed size is correct, then the printer automatically clears the message and continues the job. Sources equipped mediapresent hardware ONLY: Load the requested size and/or type in the source indicated in the message. The printer automatically clears the message and continues the job. Press Go to request that the printer check the sources again for the prompted size and type. Press Menu> or Menu< to access the Busy/ Waiting Menu group. The following functions may be available using the Busy/Waiting Menu group: -Cancel Job -Reset Printer Diagnostic Information 2-35