LiftMaster EL1SS EL1SS Installation and Programming Manual - Page 20

INTRODUCTION INSTALLATION TESTING PROGRAMMING KEYPAD PROGRAMMING PROGRAMMING DESCRIPTION OF TASK NUMBER 7 Delete User Code 9 Enter User Code 03 Enable Intercom (No-Telco) Mode 04 Enable Telco Mode 06 Speaker Volume 07 Microphone Sensitivity 09 Change the Master Code 51 Create Temporary (1 Shot) Code 52 Enable Vacation (Lock Down) Mode 53 Disable Vacation (Lock Down) Mode 54 Engage Party Mode (Relay 1) 56 Engage Party Mode (Relay 2) 021 Enable Parallel Relay Output 023 Enable Independent Relay Output Control 024 Adjust Relay Output Time (Relay 1) 025 Adjust Relay Output Time (Relay 2) FACTORY SETTING PROGRAMMING PROCEDURE Master Code (4 digits) + 7 + User Code that is to be deleted (4 digits) Master Code (4 digits) + 9 + New User Code (4 digits) + Relay/Channel Associated with the User Code (1 or 2) Master Code (4 digits) + 03 Enabled Level 2 Level 2 Disabled Master Code (4 digits) + 04 Master Code (4 digits) + 06 + Volume Level (1 = Low, 2 = Medium or 3 = High) Master Code (4 digits) + 07 + Volume Level (1 = Low, 2 = Medium or 3 = High) Master Code (4 digits) + 09 + ### + New Master Code (4 digits) Master Code (4 digits) + 51 + New Temporary (1 Shot) Code (4 digits) + Relay Associated with the User Code (1 or 2) (Expires after 24 hours.) Master Code (4 digits) + 52 Master Code (4 digits) + 53 Disabled Disabled Enabled Disabled Master Code (4 digits) + 54 Master Code (4 digits) + 56 Master Code (4 digits) + 021 Master Code (4 digits) + 023 .5 seconds .5 seconds Master Code (4 digits) + 024 + Relay Output Time (0000-8000 seconds) NOTE: Relay output time is ALWAYS 4 digits. Master Code (4 digits) + 025 + Relay Output Time (0000-8000 seconds) NOTE: Relay output time is ALWAYS 4 digits. 18