Linksys DMA2100 User Guide - Page 29

Learning Remote Buttons, MENU button to end learning mode.

Page 29 highlights

Chapter 3 Using the Media Center Extender 4. After the green light blinks one time, press and hold the corresponding button on the TV's remote control until the green LED of the Extender's remote control blinks twice to confirm the selection. If the remote did not learn the command, the red LED blinks four times quickly and terminates the learning procedure. 5. If you want to learn another key, repeat steps 3 and 4. Press DVD MENU button to end learning mode. 6. If you do not press any button in 5 seconds, the learning setup mode will end automatically. Learning Remote Buttons This is a learning remote. It can learn to program your television and can control the buttons listed below. TV TV Power This button can "learn" to turn on the TV. Volume Up Increases the current volume by one unit. If the audio is currently muted when this button is pressed, muting is disabled and the volume increases by one unit Volume Down Decreases the current volume by one unit. If the audio is currently muted when this button is pressed, muting is disabled and the volume decreases by one unit Mute Mutes the TV's audio 24 Media Center Extender

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101

Chapter 3
Using the Media Center Extender
24
Media Center Extender
24
Media Center Extender
4. After the green light blinks one time,
press and hold the
corresponding button on the TV’s remote control until the green LED
of the Extender’s remote control blinks twice to confirm the selection.
If the remote did not learn the command, the red LED blinks four
times quickly and terminates the learning procedure.
5. If you want to learn another key, repeat steps 3 and 4. Press DVD
MENU button to end learning mode.
6.
If you do not press any button in 5 seconds, the learning setup mode
will end automatically.
Learning Remote Buttons
This is a learning remote. It can learn to program your television and
can control the buttons listed below.
TV Power
This button can “learn” to turn on the TV.
Volume Up
Increases the current volume by one unit. If the audio is
currently muted when this button is pressed, muting is disabled and
the volume increases by one unit
Volume Down
Decreases the current volume by one unit. If the audio
is currently muted when this button is pressed, muting is disabled and
the volume decreases by one unit
Mute
Mutes the TV’s audio
TV