Linksys FESWSK5 User Guide - Page 22
Save Parameters and Load Driver
UPC - 745883549054
View all Linksys FESWSK5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Instant EtherFast® Series 6. At the server command line, type (for example): LOAD c:\LNE100TX\NBI31X.NLM LOAD c:\LNE100TX\MSM31X.NLM LOAD c:\LNE100TX\ETHERTSM.NLM LOAD c:\LNE100TX\LNE100.LAN FRAME = 7. Bind a protocol to the driver. For example: BIND IPX TO LNE100TX NET=XX where XX is the logical network address for your network. It can be any logical number. Note: You can save the LOAD command line parameters in a file with the name AUTOEXEC.NCF so they execute automatically when the server starts. See the Novell NetWare 386 v3.12 Installation Manual for details on how to create the AUTOEXEC.NCF file. The loading and binding are complete. The server is ready. Installing a 4.x Server 1. At the NetWare prompt (indicated by the server name), run the INSTALL.NLM program by typing load install. 2. Select Maintenance/Selective Install and press Enter. 3. Select LAN Driver Options and press Enter. 4. Press the Insert or Ins key on your keyboard to insert a new driver. Put the EtherFast® 10/100 LAN Card Disk into drive A. 5. Press F3 and specify the driver path. If the EtherFast Card disk is in drive A, for example, type a:\netware\server\nw411 and press Enter. The program will locate the EtherFast Card's LNE100TX.LAN and LNE100TX.LDI files on the disk. 6. The LNE100TX.LAN driver will appear as an option in the Select a LAN Driver field. Choose this driver to start the loading and binding procedure. 7. Add the LOAD and BIND statements to your server's AUTOEXEC.NCF file so that the LAN driver loads automatically each time your server is started up. The loading and binding are complete. The server is ready. 37 Fast Ethernet Switched 10/100 Network In a Box Installing a 5.x Server 1. On the PC in which you installed the EtherFast card, simultaneously press CTRL and ESC. 2. When the next screen pops up, select the number for System Console and press Enter. 3. In the System Console prompt, load NWCONFIG by typing nwconfig and hitting Enter. 4. Highlight Driver Options. Press Enter. 5. Highlight Configure network drivers. Press Enter. 6. Highlight Select a driver. Press Enter. 7. Press INS to Install an unlisted driver. 8. Press F3 to Specify a different path. 9. In the Specify a directory path box, type A:\NETWARE\SERVER\NW50 and press Enter. 10. In the next box, ensure that LNE100TX.LAN | EtherFast® 10/100 LAN Card is highlighted. Press Enter. 11. You will be asked Do you want to copy driver LNE100TX.LAN. Highlight Yes, then press Enter. 12. Files will begin copying to your hard drive. Afterwards, a Protocol and Parameter screen will pop up. Highlight Select/Modify driver parameters and protocol. Press Enter. 13. Arrow down the list that appears and choose which protocols you want to install. Press F10 to save. 14. Highlight Save Parameters and Load Driver. Press Enter. 38