Linksys FESWSK5 User Guide - Page 27

Instant EtherFast® Series Installing the Driver in Windows 95 Version A 1. Windows 95 will detect the EtherFast® 10/100 LAN Card and display a New Hardware Found window. 2. Insert the EtherFast® 10/100 LAN Card Driver Disk into drive A. 3. Select Driver from disk provided by hardware manufacturer, then click OK. 4. When asked for the location of the files, type a:\ and click OK. If Windows 95 goes straight to the desktop, refer to the Troubleshooting section. 5. Windows 95 will copy the appropriate network drivers to your PC. If Windows 95 asks you to supply your original Windows 95 installation CDROM or setup files, enter the appropriate path for those files (e.g.: A:\, D:\WIN95, C:\WINDOWS\OPTIONS\CABS). 6. During the installation, windows may ask you for a computer and workgroup name. If so, refer to the Troubleshooting section. Once you have established computer and workgroup names, return here to continue with the installation. 7. After Windows 95 has completed copying the necessary files to your PC, it may ask you to restart your computer. Remove the Driver Disk and click OK. The Windows 95 Version A driver installation is complete. Please continue on to Configuring the LAN Card for Windows 95, 98, and Millennium for more information about the setup of the LAN Card. Consult your network administrator for network configuration information if necessary. 47 Fast Ethernet Switched 10/100 Network In a Box Novell NetWare 3.x Client Setup for Windows 95, 98 or Millennium These instructions explain how to set up the regular Novell NetWare 3.x client for use on a Windows 95, 98 or Millennium PC. 1. Follow the Windows 95 setup instructions or the Windows 98 setup instructions. 2. Start up Windows 95 or 98. Click on Start, Settings, then Control Panel. Double-click on Network. The Network window appears. Click on the Configuration tab. 3. In the Primary Logon Box, choose Client for NetWare Networks. 4. Under the The following network components are installed box, highlight Client for NetWare Networks and click on the Properties button. 5. The Client for NetWare Networks Properties window appears. Under the General tab, enter the name of your network's Preferred Server. Assign the First Network Drive Letter; the default is F. Make sure the Enable logon script processing is checked. 6. Click OK. Click on the Access Control tab. Make sure the Share-level access control option is selected; do not select User-level access control. 7. When you're done, click OK to restart your computer. The NetWare portion of your Windows Networking setup is complete. 48