Linksys WRE54G Cisco WAP54GP Wireless-G Exterior Access Point User Guide - Page 37

Wireless Repeater, Survey, Apply, Close, Refresh, Wireless - Advanced Wireless - wrt54g

Page 37 highlights

Wireless-G Exterior Access Point Wireless Repeater When set to Wireless Repeater mode, the Access Point receives the signal from the remote Access Point and retransmits its signal. (This feature only works with the Linksys Wireless-G Exterior Access Point (model number: WAP54GPE), Wireless-G Interior Access Point (model number: WAP54GP), Wireless-G Access Point (model number: WAP54G), and Wireless-G Broadband Router (model number: WRT54G). To configure a Wireless Repeater environment, click Wireless Repeater and enter the MAC addresses of the remote access points in the MAC fields. If you do not know an access point's MAC address, click the Site Survey button. Select the access points you want to use and click the Apply button. Then click the Close button to return to the AP Mode screen. If you do not see the access point you want, click the Refresh button to run another site survey. Chapter 6: Configuring the Wireless-G Exterior Access Point The AP Mode Tab Figure 6-15: Wireless - Advanced Wireless 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

30
Chapter 6: Configuring the Wireless-G Exterior Access Point
The AP Mode Tab
Wireless-G Exterior Access Point
Wireless Repeater
When set to Wireless Repeater mode, the Access Point receives the signal from the remote Access Point and
retransmits its signal. (This feature only works with the Linksys Wireless-G Exterior Access Point (model
number: WAP54GPE), Wireless-G Interior Access Point (model number: WAP54GP), Wireless-G Access
Point (model number: WAP54G), and Wireless-G Broadband Router (model number: WRT54G).
To configure a Wireless Repeater environment, click
Wireless Repeater
and enter the MAC addresses of the
remote access points in the
MAC
fields. If you do not know an access point’s MAC address, click the
Site
Survey
button. Select the access points you want to use and click the
Apply
button. Then click the
Close
button to return to the
AP Mode
screen. If you do not see the access point you want, click the
Refresh
button
to run another site survey.
Figure 6-15: Wireless - Advanced Wireless