Linksys WRTP54G User Guide - Page 33
Flags, Metric, Ref Reference, User, and Interface are displayed. Click - set advanced routing table
UPC - 745883564903
View all Linksys WRTP54G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Wireless-G Broadband Router with 2 Phone Ports Subnet Mask. The Subnet Mask determines which portion of a Destination IP address is the network portion, and which portion is the host portion. Gateway. This is the IP address of the gateway device that allows for contact between the Router and the remote network or host. Hop Count. This determines the maximum number of steps between network nodes that data packets will travel. A node is any device on the network, such as PCs, print servers, routers, etc. Interface. Select Local or Internet, depending on the location of the static route's final destination. Delete Entry. If you need to delete a route, select its number from the drop-down menu, and click the Delete Entry button. Show Routing Table. Click the Show Routing Table button to open a screen displaying how data is routed through your local network. For each route, the Destination LAN IP address, Default Gateway, Subnet Mask, Flags, Metric, Ref (Reference), User, and Interface are displayed. Click the Refresh button to update the information. When you have finished making changes to this screen, click the Save Settings button to save the changes, or click the Cancel Changes button to undo your changes. Figure 5-10: Routing Table Entry List Chapter 5: Configuring the Router 25 The Setup Tab - Advanced Routing