Linksys WRTU54G TM User Guide - Page 20
SIM Card Installation, Top Piece
UPC - 745883575350
View all Linksys WRTU54G TM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Wireless-G Broadband Router with 2 Phone Ports SIM Card Installation Two SIM cards are required for a 2-line configuration. To install a SIM card, follow these steps: 1. Slide the SIM card cover down, then lift off. 2. Gently slide up the SIM card holder. Then from the bottom side, carefully lift up the SIM card holder. Do not lift the holder until it is correctly in place or it could break. 3. Position the SIM card with the gold metal side up and towards the card slot opening. Carefully insert the SIM card into the slot until it lines up with the bottom edge of the top piece of the holder and before it hits the bottom piece of the holder or the SIM card or holder could break. 4. Fold down the SIM card holder and slide down into place. 5. Replace the SIM card cover. You might need to push it hard to lock it in place. Bottom Side 1 Figure 4-11: Slide Down the SIM Card Cover Bottom Piece of Holder Slide SIM in only this far and not to the bottom 3 2 Slide up SIM card holder this direction Top Piece of Holder Figure 4-12: Slide and Lift SIM Card Holder and Insert SIM Card Chapter 4: Connecting the Wireless-G Broadband Router with 2 Phone Ports SIM Card Installation 4 Figure 4-13: Fold Down the SIM Card Holder and Slide into Place 13