Linksys WVC200 Cisco WVC200 2.4 GHz Wireless-G PTZ Internet Camera with Audio - Page 11

Getting to Know the PTZ Internet Camera, Camera LCD Screen and Built-in Microphone, Camera LEDs - network camera

Page 11 highlights

Getting to Know the PTZ Internet Camera 3 Camera LCD Screen and Built-in Microphone Getting to Know the PTZ Internet Camera Congratulations on purchasing your camera from Linksys! Linksys has the only two cameras that are Wi-Fi certified in the United States, one of which is the WVC210. Camera LCD Screen and Built-in Microphone The camera has a LCD screen that indicates the camera's current IP address and whether it is a fixed or dynamic address. If the camera uses a fixed IP address, then the screen will display the word "FIXED." If the camera uses a dynamic IP address, then the screen will display the word "DHCP." The built-in microphone is located approximately one inch below the LCD screen, in the middle of the camera's front panel. It has a range of approximately 9 feet (3 meters), depending on environmental conditions. Built-in Microphone Camera LEDs The camera has four LEDs to let you know how the camera is functioning. LED POWER ACTIVITY ETHERNET WIRELESS Description Amber. The POWER LED lights up when the camera is powered on. It flashes for about 10-15 seconds while the camera is initializing. Green. The ACTIVITY LED flashes when there is activity. Green. The ETHERNET LED lights up when there is a connection to a wired network. It flashes when data is transmitted to or received from the wired network. Green. The WIRELESS LED lights up when there is a connection to a wireless network. It flashes when data is transmitted to or received from the wireless network. WVC200-210 User Guide 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

WVC200-210 User Guide
7
3
Camera LCD Screen and Built-in Microphone
Getting to Know the PTZ Internet Camera
Getting to Know the PTZ Internet
Camera
Congratulations on purchasing your camera from Linksys! Linksys has the only two cameras
that are Wi-Fi certified in the United States, one of which is the WVC210.
Camera LCD Screen and Built-in Microphone
The camera has a LCD screen that indicates the camera’s current IP address and whether it is a
fixed or dynamic address. If the camera uses a fixed IP address, then the screen will display the
word “FIXED.” If the camera uses a dynamic IP address, then the screen will display the word
“DHCP.”
The built-in microphone is located approximately one inch below the LCD screen, in the middle
of the camera’s front panel. It has a range of approximately 9 feet (3 meters), depending on
environmental conditions.
Camera LEDs
The camera has four LEDs to let you know how the camera is functioning.
LED
Description
POWER
Amber. The POWER LED lights up when the camera is powered on. It flashes
for about 10-15 seconds while the camera is initializing.
ACTIVITY
Green. The ACTIVITY LED flashes when there is activity.
ETHERNET
Green. The ETHERNET LED lights up when there is a connection to a wired
network. It flashes when data is transmitted to or received from the wired
network.
WIRELESS
Green. The WIRELESS LED lights up when there is a connection to a wireless
network. It flashes when data is transmitted to or received from the wireless
network.
Built-in
Microphone