Linksys WVC200 Cisco WVC200 2.4 GHz Wireless-G PTZ Internet Camera with Audio - Page 33

Configuring Software Basic • Encryption - Select between TKIP and AES. • Shared Key - Enter the shared key used for accessing the wireless network. WPA2 Personal Encryption is limited to AES, and there is a field to enter a shared key. Other • Enable UPnP (Discover Only)- If enabled, the camera will broadcast its availability through Universal Plug and Play protocol. UPnP compatible systems such as Windows XP will then be able to detect the presence of the camera. • Enable Alternate Port - If enabled, HTTP connections (from your web browser, viewer and recorder utility) can use an alternative port instead of port 80 (the standard HTTP port) to access the camera. • Enable QoS Mode-Check to enable Quality of Service (QoS) for media streams. • DSCP-If QoS is enabled, please enter the Differentiated Services Code Point (DSCP) to be used on processing QoS packets. The default value is 12. To set up port forwarding use the following procedure: 1. Enable the alternate port by checking the box, then enter a port number in the field. 2. Click on Apply and close the page. When you open the URL to the camera, you now must specify the port number, for example: http://192.168.128.23:1024 3. Connect to your router and go to the Port Forwarding page. Add the IP address of your camera as well as the port that you specified in the camera set up. For example: WVC200-210 User Guide 29