Linksys WVC200 Cisco WVC200 2.4 GHz Wireless-G PTZ Internet Camera with Audio - Page 43
Pan/Tilt, Set Preset - motion detection
![]() |
UPC - 745883569045
View all Linksys WVC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Configuring Software Pan/Tilt • Frame Rate- Defaults to 1 fps • Pre-Capture Length - Defaults to 1 second • Post Capture Length - Defaults to 1 second Pan/Tilt • This option is only available if your camera is fitted with a Pan/Tilt control. If available, select the desired option to resolve conflict between the Pan/Tilt and Motion Detection features. • Check the box to set the idle time for motion detection position, this defaults to 1 minute. • Set Area & Sensitivity - Click this button to enter the motion detection sub-screen. You can set the area or areas of the video image to be examined, and adjust the sensitivity of detection for each area. NOTE: Motion detection can be triggered by rapid changes in lighting conditions, as well as by moving objects. For this reason, it should only be used indoors. Pan/Tilt Clicking on Pan/Tilt shows the Set Preset, Pan/Tilt Control, and Rotation Sequence settings for the camera. Set Preset • Set Positions - Set the desired position through adjusting the control panel. • Calibrate Button - Click this button to reset the calibration of Pan/Tilt area. WVC200-210 User Guide 39
![](/manual_guide/products/linksys-wvc200-cisco-wvc200-24-ghz-wirelessg-ptz-internet-camera-audio-administration-guide-52a4ea3/43.png)