Linksys WVC200 Cisco WVC200 2.4 GHz Wireless-G PTZ Internet Camera with Audio - Page 15
Connection to a Wired Network for Setup - port
UPC - 745883569045
View all Linksys WVC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connecting the PTZ Internet Camera Connection to a Wired Network for Setup 3. Connect the other end of the cable to the Ethernet port on the camera. 4. Connect the power adapter to the Power port on the camera. 5. Plug the power adapter into an electrical outlet. 6. The camera's Ready LED flashes while the camera is initializing. The camera is ready for use when the Ready and Ethernet LEDs are solidly lit. CAUTION: You MUST connect the camera to a PC, router, or switch using the Ethernet network cable BEFORE powering on the camera. Otherwise, the camera will not function. WVC200-210 User Guide 11
WVC200-210 User Guide
11
Connection to a Wired Network for Setup
Connecting the PTZ Internet Camera
3.
Connect the other end of the cable to the Ethernet port on the camera.
4.
Connect the power adapter to the Power port on the camera.
5.
Plug the power adapter into an electrical outlet.
6.
The camera’s Ready LED flashes while the camera is initializing. The camera is ready for use
when the Ready and Ethernet LEDs are solidly lit.
CAUTION:
You MUST connect the camera to a PC, router,
or switch using the Ethernet network cable BEFORE
powering on the camera. Otherwise, the camera will not
function.